Special Tips How to Overcome Mobile Damaged Affected Air, Smartphone buddy exposed to water?
Should be quickly
handled tuh, if HP does not want to die in total.
It is quite difficult to
save cell phone that has been entered into the water. Some components of mobile
telephone will not function when in contact with water.
Unless the mobile phone
is a sophisticated mobile phone with certified water resistant (waterproof),
such as samsung galaxy S7 and Experia Z series. Although immersed in water, the
phone will not die and can still be used normally.
If the phone is mediocre
like mine, there will be three possibilities when submerged in water for a long
time ...
Totally dead.
Can flame but not
normal.
Blank (white color
flame).
If it so, the costs
incurred for repair must have been enormous.
Therefore, if the HP pal
exposed to water (whether it be rain water, sea water, or other liquids) should
be dealt with quickly and properly so that HP could be saved before damage
occurs.
Which part of Damaged
When HP kecemplung Into Air?
All depends on how long
the phone pal submerged in water. If the time is long enough, it could be a
component in PCB (printed circuit board) to be broken.
PCB was a place where
critical components such as CPU, Ram, and others laid. So, this is the main component.
The lightest damage
usually is on the speakers, sim card slot, and LCD.
Not long ago one of my
friends smartphone exposed to rain just within a few minutes, these three
components has been directly damaged.
Repair costs incurred
achieve 800ribu rupiah.
Wow, quite expensive
huh?
Therefore, if my friend
does not want to pay expensive to repair HP is exposed to water, do some
troubleshooting tips HP damaged due to exposure to water:
1. Remove the Battery,
Memory Card, and SIM card
This is the first thing
to do buddy. Do not try to turn the phone in wet conditions.
Remove the battery as
soon as possible to minimize damage due to short or shorting after HP exposed
to water.
Buddy know that water
and electricity were not friendly? So do not try menyalakanya before posel
completely dry.
Do not forget to also
remove the SIM card and the memory cardnya (if any).
2. Unloading Inside
Mobile
The next step is rather
difficult. Buddy must dismantle the phone is exposed to water earlier. Remove
all scrup that exist on the casing (if you have not got obengnya can borrow or
buy).
If the casing is open,
remove the existing scrup also on the PCB. Anyway unloading a total of up to
small parts.
3. Focus On LCD
This is the most
important. After all exposed, clean the LCD is first.
These components are
usually often damaged after being exposed for LCD software contains filaments
that are not resistant to moisture water. If left too long black spots will
appear on the LCD.
That's why the first
part of the LCD to be broken when HP submerged in water.
4. Do Drying Total
Once dried LCD parts of
water, then dry the HP else like PCBs by using a blower, fan, or Sounds with
hair drayer.
But if the PCB drying
with a hair drayer not too close and too long because of the heat generated
will damage the PCB components.
To overcome the battery
drop due to exposure to water, my friend can outsmart by drying the battery
under the scorching sun at least 1 to 2 hours or sparingly until the battery is
completely dry.
After that charge the
battery by using a portable charger.
5. Soak In Rice
Take a box full of rice
and soak all components HP is exposed to water earlier in the rice within 1 or
2 days.
It aims to drain the
remnants of water that exist on the HP component, because it contains the
electrostatic rice can absorb moisture and reduce humidity.
6. Raft Mobile Back
After the drying process
is complete, now you stay reassemble the components that have been disassembled
before. Raft properly and carefully so as not to damage the other components.
If it has been
assembled, try turn.
The HP supposed to be
normal again, or at least flame flame blink (a white flame), all depending on
how long the HP underwater and how fast buddy handle HP.
Remember yes, all of the
above tips are not tips for fixing HP is exposed to water but to give first aid
after HP submerged in water.
So, if the phone my
friend still can not flame normal after doing the above tips, you should take
it to the counter service HP to be repaired intensively.
So I can tell about Special Tips How to Overcome Mobile Damaged Affected Air may be useful, do not forget to share so much and thank you